LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 47 Brakes- Brake Hydraulic System, Regulator, Booster -- 92A Cayenne >> WM 477619 Removing And Installing Vacuum Pump 3.6 (Cayenne Tip "Platinum Edition", Cayenne Tip, Cayenne Man) >> Subsequent Work

Subsequent Work

  1. Install protective plate.
    1. 1.1. Fit and tighten screw -3-  on the protective plate -1-  .
    2. 1.2. Raise the vehicle.
    3. 1.3. Fit and tighten nuts -2-  on the protective plate -1-  .
      Fig 1: Identifying Protective Plate, Nuts And Screws
      G09937594Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install engine guard and tighten screws -arrows-  .
    Fig 2: Locating Engine Guard Screws
    G09937595Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Install cross panel at the left and right. → Installing Cross Panel
  4. Install front cover (engine compartment). → 700219 REMOVING AND INSTALLING FRONT COVER (ENGINE COMPARTMENT)
  5. Install wiper linkage. To do this, complete Steps 6-12 in → 921519 REMOVING AND INSTALLING WIPER MOTOR .
  6. Install cowl panel cover. → 664419 REMOVING AND INSTALLING COWL PANEL COVER
  7. Install both wiper arms. → Installing Wiper Arms
  8. Install rear profile seal for front lid. → Installing Front Lid Seal
scientia non olet · About LEMON Manuals