Removing Trim Panel For Rear Lid
- Open the tailgate (rear lid).
- Remove lower part of rear trim panel.
- 2.1. Open lid of warning triangle storage compartment -A- .
- 2.2. Remove warning triangle.
- 2.3. Unscrew fastening screws -1- under the loop for securing the warning triangle.
- 2.4. Unclip two luggage compartment lamps -1- using a screwdriver.
- 2.5. Release electric plug connection for luggage compartment lamps -2- at the side of the connector -a- and disconnect it -B- .
- 2.6. Unscrew fastening screws -3- in the two finger plates.
- 2.7. Only with power tailgate closing facility:
Unclip switch for power tailgate closing. To do this, grasp the luggage compartment lamp through the opening and press the switch out from the rear.
- 2.8. Only with power tailgate closing facility:
Disconnect electric plug connection -a- .
- 2.9. Unclip the clips -4- for the lock cover -5- using a plastic wedge and pull them off in direction of arrow.
- 2.10. Carefully unclip the clips for the lower part of the trim panel -6- at the marked areas using a suitable tool.
- 2.11. Remove lower part of trim panel by pulling it downwards.