Installing Front Camera
Information
Always comply with the regulations for handling ESD-sensitive components!
- Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche .
- The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed .
- Never touch the electric pins and plug contacts .
Information
Check that the lines are routed correctly.
- Do not crush, kink or tension lines .
- Do not route GSM antenna line over the GPS antenna line .
Information
Do not touch the front camera lens!
- Installation is performed in reverse order to removal.