Installing Control Unit For Gas-Discharge Headlight

Information 

• Some of the repair illustrations show only one side of the vehicle  .
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well  .

1. Fit control unit -arrow-  . Check that it is fitted securely. (Rubber seal)
   Fig 1: Fitting Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Secure control unit with the fastening screws -1 and 2-  . Tightening torque 1.2 Nm (1 ftlb.) 
   Fig 2: Securing Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.