Removing Tail Light
NOTE:
Voltage peaks
- Risk of damage to load or to the control unit
→ Remove the ignition key and switch off load before disconnecting or removing load.
- Open rear lid.
Illustration, left side .
- Loosen tail light.
- 2.1. Lift cover off the tail light using a plastic spatula.
- 2.2. Loosen both fastening screws -1- .
- Remove tail light.
- 3.1. Remove tail light from the clip nut -1- by pulling it to the rear.
- 3.2. Release electric plug connection -2- and remove tail light.