Replacing Halogen Bulb

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

Fig 1: Identifying Position Of Halogen Bulb

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Release cover flap -A-  and open it -B-  .
   Fig 2: Opening Cover Flap

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Unscrew fastening screws -1-  .
   Fig 3: Removing Halogen Bulb

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Release bulb socket by turning it -A-  and remove the bulb -B-  .
4. Disconnect electric plug connection -A-  .
5. Remove carrier plate from bulb -B-  .
Fig 4: Pulling Out Bulb
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Installation is performed in reverse order to removal.