LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster Spyder, Standard Trans >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN >> WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Preliminary Work

Preliminary Work

  1. If the wheel bearing needs to be replaced, loosen axle nut (vehicle on ground) while operating the brake (2 fitters required).
  2. Raise the vehicle → WM 4X00IN LIFTING THE VEHICLE (ALL MODELS)
  3. Remove rear wheel → REMOVING WHEEL
scientia non olet · About LEMON Manuals