Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Heat up wheel bearing housing | For removing and installing the wheel bearing | Temperature | 100°C | ||
| Cover for wheel bearing to wheel bearing housing, M8 |
IMPORTANT:
Do not grease threaded connections in Dacromet finish (aluminum colored).
|
Tightening torque | 37 Nm (27 ftlb.) | ||
| Brake cover plate to wheel bearing housing, M6 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 10 Nm (7.5 ftlb.) |