LEMON Manuals
: Even more car manuals for everyone
Home
>>
Porsche
>>
2012
>>
Boxster Spyder, Standard Trans
>>
Repair and Diagnosis
>>
Drivelines & Axles
>>
Axle Shafts
>>
40 - Front Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN
>>
WM 405719 Removing And Installing Front Wheel Bearing (All Models)
>>
Subsequent Work
Subsequent Work
Install wheel bearing housing.
1.1. Tighten tension bolt on the wheel hub (wheel hub/wheel bearing threaded joint). Use a new lock nut (M22 x 1.5). Tightening torque: 460 Nm (340 ftlb.).