LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster Spyder, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 51 - Body Center, Roof, Frame - 987-BOXSTER & CAYMAN >> WM 518755 Replacing Seat Cross Member (All Models) >> Preparing Connection Areas Of The Body For Installing The Seat Cross Member >> Preparing Connection Areas Of Body For Installing Seat Cross Member

Preparing Connection Areas Of Body For Installing Seat Cross Member

  1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare.
    Fig 1: Identifying Body Seat Cross Member Connection Areas (A, B And C)
    G09589065Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals