LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster Spyder, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 51 - Body Center, Roof, Frame - 987-BOXSTER & CAYMAN >> WM 510355 Replacing Roof (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R) >> Installing Roof >> Installing Roof Sound Absorber

Installing Roof Sound Absorber

Information 

The fastening points must remain accessible when positioning the sound absorbers (insulation).

  1. Position and mark sound absorber for roof at the gap dimensions -X-  → Dimension X: 261.5 mm+/-5 mm  and -Y-  → Dimension Y: 294.5 mm+/-5 mm  .
    Fig 1: Identifying Roof Sound Absorber Installation Position
    G09588556Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pull of the protective film and affix the roof sound absorber in the marked area.
scientia non olet · About LEMON Manuals