LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster Spyder, Automatic DCT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 40 - Front Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN >> WM 407819 Removing And Installing Connecting Link (Suspension/Stabilizer) (All Models) >> Removing Front Connecting Link (Suspension/Stabilizer)

Removing Front Connecting Link (Suspension/Stabilizer)

  1. Remove wheel. → REMOVING WHEEL Then loosen the lock nuts -arrows-  on the suspension/stabiliser. When loosening, counter with Torx T30 or open-ended wrench.
    Fig 1: Locating Connecting Link Nuts (Suspension/Stabilizer)
    G09587516Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Support wheel suspension on wheel carrier with suitable jack, and remove suspension/stabilizer.
scientia non olet · About LEMON Manuals