LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster Spyder, Automatic DCT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 40 - Front Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN >> WM 405055 Replacing Front Wheel Bearing Housing (All Models) >> Replacing Front Wheel Bearing Housing - Subsequent Work

Replacing Front Wheel Bearing Housing - Subsequent Work

  1. Fit front wheel → 440519 REMOVING AND INSTALLING WHEEL .
  2. Tighten the central nut at the wheel carrier at the side of the wheel to 460 Nm (340 ftlb.) Actuate the brake while doing this.
  3. Check wheel alignment values on front axle and adjust if necessary → WM 4400TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENTALIGNING VEHICLE AT FRONT AND REAR .
scientia non olet · About LEMON Manuals