Removing Brake Pedal

Remove brake light switch.
Release brake light switch -1- by turning it 90° and pull it out of the installation opening.

Fig 1: Exploded View Of Brake Pedal Assembly
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Disconnect brake pushrod from brake pedal.
Remove bolt and threaded bushing, see -Inset- .

Fig 2: Identifying Bolt And Threaded Bushing
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove pedal axle.
Screw out and remove lock nut -1b- and nut -1a- as well as pedal axle -2- .

Fig 3: Locating Pedal Axle Lock Nut
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull out brake pedal.
Turn the brake pedal and brake pushrod as required, see -Inset- .

Fig 4: Identifying Bolt And Threaded Bushing
Courtesy of PORSCHE CARS NORTH AMERICA, INC.