LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster Spyder, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- 987-BOXSTER-CAYMAN >> WM 637319 Removing And Installing Rear Bracket (Impact Pipe, Impact Absorber) (All Models) >> Installing Rear Bracket (Impact Pipe, Impact Absorber) >> Install Rear Impact Pipe

Install Rear Impact Pipe

Fig 1: Identifying Rear Carrier Installation Position
G09590705Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position the impact pipe -2-  with seal -3-  .
  2. Screw in fastening screws -1-  and tighten to the required tightening torque → Tightening torque: 17 ftlb.  .
    3. Fig 2: Identifying Impact Pipe, Seal And Mounting Screws
    G09590706Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals