Diagram Of Body Bonding Points And Sealing Elements

Fig 1: Body Bonding Points And Sealing Elements Diagram

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Bonding area for cowl panel frame, roof frame → 510355 REPLACING ROOF
2. Spot welding/bonding procedure in area of wheel housing, inner side section and outer side section. → 535555 REPLACING REAR SIDE SECTION
3. Seal (moulded part) in area of inner side section and outer side section. → 535555 REPLACING REAR SIDE SECTION
4. Bonding procedure in light housing area. → 535555 REPLACING REAR SIDE SECTION
5. Rivet-bonding procedure in roof frame reinforcement area → 510855 REPLACING ROOF REINFORCEMENT
6. Resistance spot-welding/bonding procedure in cowl panel frame area.
7. Resistance spot-welding/bonding procedure in hinge pillar reinforcement area → 516255 REPLACING HINGE PILLAR REINFORCEMENT
8. Resistance spot-welding/bonding procedure in inner side member area.
9. Bonding procedure in the area → 510355 REPLACING ROOF
10. Bonding procedure in the bulkhead panel area → 510855 REPLACING ROOF REINFORCEMENT
11. Bonding procedure in the bulkhead panel area → 510855 REPLACING ROOF REINFORCEMENT
12. Expanded sealant in the roof reinforcement is sealed using 2K acoustic filler foam when replacing the roof reinforcement. → 530655 REPLACING SIDE SECTION REINFORCEMENT

The bonding and sealing elements must be replaced during repairs. The procedure is described in the relevant Information on body repairs.