LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN >> WM 425219 Removing And Installing Rear Wheel Bearing Housing (Wheel Carrier) (Except BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Subsequent Work

Subsequent Work

  1. Fit rear wheel → INSTALLING WHEEL
  2. Tighten axle nut on drive shaft (if it was removed).

    Tighten axle nut securing drive shaft to wheel hub: → Tightening torque: 460 Nm (340 ftlb.) 

scientia non olet · About LEMON Manuals