LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN >> WM 421419 Removing And Installing Support Plate (Except BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Removing And Installing Support Plate >> Removing Support Plate

Removing Support Plate

  1. Raise the vehicle at the prescribed jacking points → WM 4X00IN LIFTING THE VEHICLE (ALL MODELS) .
  2. Remove rear underbody panel.
  3. Remove right and left diagonal braces -B-  and the support plate -A-  (→ Removing Support Plate  . Pull out the support plate -A-  without undue force.
    Fig 1: Identifying Support Plates
    G09587558Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals