LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster Base, Standard Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 47 - Brakes - Hydraulic Brake System, Regulator -- 987-BOXSTER-CAYMAN >> WM 477619 Removing And Installing Vacuum Pump (Except CAYMAN, CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Removing Vacuum Pump >> Removing

Removing Vacuum Pump: Removing

  1. Remove the tandem pump.

    Release the vacuum line -2-  and pull it off.

    Screw out screws, see -Arrows-  , and remove the tandem pump.

    Fig 1: Locating Tandem Pump Screws
    G09587945Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    When you loosen the fastening screws, engine oil will run out of the vacuum pump. Place a suitable container underneath to collect the emerging engine oil. The engine-oil level must be checked and topped up afterwards (following installation).

scientia non olet · About LEMON Manuals