Removing Tail Light

Fig 1: Identifying Tail Light

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Release the electric connector on the tail light -A-  and pull it off.
2. Unscrew the three fastening nuts -1-  for the tail light.
3. Remove the tail light.
Fig 2: Unscrewing Tail Light Fastening Nuts
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

If the tail light is only removed and installed again, the seal for the tail light can be re-used.

If the seal for the tail light is damaged, this seal must be replaced.

If the seal is removed from the light, this seal must be replaced.

• If necessary: Pull off the seal and carefully clean the sealing face with a knife.