WM 423819 Removing And Installing Rear-Axle Carrier Side Section (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R): Information: Installing

Fig 1: Disassembled View Of Rear-Axle Carrier

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Rear-axle carrier side section
2. Diagonal brace
3. Support plate
4. Cross member
5. Sensor
6. Restraining cable
7. V-brace

1. Install rear-axle carrier side section.

   Tighten screws -3- only slightly. 

   Fig 2: Locating Rear-Axle Carrier

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Install cross member together with sensor.

   Tighten screws -4a- only slightly. 

   Sensor 

   Fit sensor on control arm and connect electric plug connection.

   Fig 3: Identifying Cross Member Components

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.