LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> Collision >> Body Panels >> 55 - Lids, Flaps -- 987-BOXSTER-CAYMAN >> WM 555919 Removing And Installing Rear Wall Cover (BOXSTER, BOXSTER S, BOXSTER LIM. Ed. "Orange", BOXSTER S LIM. Ed. "Orange", BOXSTER Black Edition, BOXSTER S "RS 60 SPYDER", BOXSTER "Sport Edition", BOXSTER S "Sport Edition", BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition) >> Installing Rear Wall Cover

Installing Rear Wall Cover

  1. Position rear wall cover -3-  on the rear wall.
  2. Tighten fastening nuts -2-  and fastening screws -1-  . Tightening torque → Tightening torque: 7.0 ftlb. 
    3. Fig 1: Installing Rear Wall Cover
    G09589734Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals