| Threaded connection securing brake pressure line to brake master cylinder, M12 x 1 |
Tightening torque was increased to 25 Nm/19 ftlb. (also applies to older vehicles). Counter using special tool 9763 while tightening |
Tightening torque |
25 Nm (19 ftlb.) |
|
|
| Threaded connection securing brake pressure line to hydraulic unit, M12 x 1 |
Tightening torque was increased to 25 Nm/19 ftlb. (also applies to older vehicles) |
Tightening torque |
25 Nm (19 ftlb.) |
|
|
| Threaded connection securing brake pressure line to hydraulic unit, M10 x 1 |
|
Tightening torque |
16 Nm (12 ftlb.) |
|
|
| Threaded connection securing brake pressure line to distributor, brake hose and brake calliper, M10 x 1 |
|
Tightening torque |
16 Nm (12 ftlb.) |
|
|
| Threaded connection securing brake pressure line to intermediate piece, M10 x 1 |
Centre underbody |
Tightening torque |
16 Nm (12 ftlb.) |
|
|
| Threaded connection securing brake pressure line to intermediate piece, M12 x 1 |
Centre underbody |
Tightening torque |
25 Nm (19 ftlb.) |
|
|