Brake Calliper
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Threaded connection securing brake calliper to wheel carrier, M12 x 1.5 | Replace screws on front and rear axle whenever removed. | Tightening torque | 85 Nm (63 ftlb.) | ||
| Threaded connection securing brake pressure line to brake calliper, M10 x 1 | Tightening torque | 16 Nm (12 ftlb.) | |||
| Threaded connection securing connecting line to brake calliper, M10 x 1 | Tightening torque | 12 Nm (9 ftlb.) | |||
| Threaded connection securing bleeder screw to brake calliper, M10 x 1 | Tightening torque | 8-12 Nm (6 - 9 ftlb.) |