Disassembling Remote Control

Information 

In the event of a complaint (remote control buttons too easily pressed), the silicone pad and buttons can be replaced with modified spare parts.

1. Insert a small screwdriver between the cover and the lower part of the remote control -arrow-  and carefully lift the lid off.
   Fig 1: Removing Cover Of Remote Control

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Remove silicone pad -1-  with the printed circuit board (PCB) from the remote control housing.
   Fig 2: Removing Silicone Pad From Remote Control Housing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Remove PCB -2-  from the silicone pad -1-  .
   Fig 3: Inserting Silicone Pad With PCB In Remote Control Housing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Lift up buttons (two or three, depending on the vehicle type) and pull them out of the remote control housing.
   Fig 4: Removing Buttons From Housing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.