Assembling Remote Control

Information 

In the event of a complaint (remote control buttons too easily pressed), the silicone pad and buttons can be replaced with modified spare parts.

1. Engage new buttons in the remote control housing.
   Fig 1: Engaging Buttons In Remote Control Housing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Insert PCB -2-  into the new silicone pad -1-  .
   Fig 2: Inserting Silicone Pad Using PCB In Remote Control Housing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Insert silicone pad -1-  with PCB into the remote control housing.
   Fig 3: Removing Silicone Pad From Remote Control Housing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Position the cover on the bottom part of the remote control and press together until the cover clicks into place.
   Fig 4: Installing Cover Of Remote Control

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Test the remote control by pressing all the buttons one after the other.