Installing Gas-Discharge Control Unit
- Slide the control unit into the holder and secure with the two fastening screws.
- Engage the high-voltage line on the headlamp unit.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Push on electric connector -4-
for the gas-discharge control unit until the connector engages securely.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Connect electric connector to the gas-discharge headlight and turn it clockwise as far as it will go (bayonet lock).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fit gas-discharge control unit and secure with the three fastening screws -1-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.