Installing Halogen Bulb

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

1. Fit new bulb into the headlight and clamp securely with the locking clip.
   Fig 1: Installing Halogen Bulb

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Press in the electric plug until it clicks into place.
3. Fit the cover -1-  (arrows) and turn it clockwise to engage it (bayonet lock).
Fig 2: Pressing Electric Plug
Courtesy of PORSCHE CARS NORTH AMERICA, INC.