Preliminary Work

Information 

Please note the following for the V6 => 

• The repair concepts for he V6 are the same as for the V8.
• The special features and component deviations are listed and shown in

> 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES AND ASSEMBLY OVERVIEWS

• More significant deviations are shown in separate descriptions.
• If no special features are specifically highlighted, the assembly and adjustment instructions for the V8 apply.

1. Pull out the fuse for the fuel pump or disconnect the battery. This prevents the fuel pump from starting when the door is opened.
2. Remove intake-air distributor.

   > 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR