Installing Starter

Information 

Tightening torques, tightening sequence and assembly overviews for the engine and transmission:

• Group 1: (Engine) → Technical Values
• Group 2: (Petrol, Exhaust, Engine-Electric) → 2X00IN TECHNICAL VALUES
• Group 3: (Power Transmission) → 3X00IN TECHNICAL VALUES
  Fig 1: Identifying Installation Position Of Starter

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. The starter is installed in reverse order to removal.
   1. 1.1. Fastening nut securing terminal 50 to starter Tightening torque 10 Nm (7.5 ftlb.) 
   2. 1.2. Fastening screws for starter Tightening torque 45 Nm (33 ftlb.) +8 Nm (+6 ftlb.) 
   3. 1.3. Fastening nut securing B+ line to starter Tightening torque 18 Nm (13 ftlb.)