LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Panamera Turbo >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- PANAMERA (970) >> WM 136019 Removing And Installing Flywheel (PANAMERA, PANAMERA S, PANAMERA 4, PANAMERA 4S, PANAMERA Turbo, PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Removing Flywheel

Removing Flywheel

  1. Block flywheel. To do this, attach toothed segment 9538/1  to a screw hole at the bottom of the oil guide housing so that at least one tooth engages with the ring gear. → Toothed segment 
    Fig 1: Identifying Toothed Segment
    G09804394Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove screws. Replace screws.
    Fig 2: Identifying Flywheel And Clutch
    G09804395Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. Flywheel
    2. Fastening screw
    3. Clutch drive plate
    4. Clutch pressure plate
    5. Fastening screw
    Fig 3: Identifying PDKit Flywheel
    G09804396Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. Flywheel
    2. Fastening screw
scientia non olet · About LEMON Manuals