LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Panamera Turbo >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling 4.8L Turbo -- 970 - PANAMERA (970) >> WM, 194019 Removing And Installing Coolant Reservoir >> Installing Coolant Reservoir

Installing Coolant Reservoir

The coolant reservoir is installed in reverse order.

  1. Slide the reservoir towards the rear and into the guide.
  2. Fit connections and reservoir screws.

    Fit fastening screw. > Tightening torque 3 Nm (2 ftlb.) 

    Fit vent line.

    Fit coolant hose.

    Plug in connector for the water level sensor.

scientia non olet · About LEMON Manuals