LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Panamera Turbo >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts -- PANAMERA (970) >> WM 429019 Removing And Installing Rear Anti-Roll Bar (PDCC) (Except PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Anti-roll bar clamp to chassis subframe M10 x 30 thread Tightening torque 50 Nm (37 ftlb.)    
Connecting link (suspension/stabilizer) to anti-roll bar (PDCC) M10 thread Tightening torque 40 Nm +30°  
scientia non olet · About LEMON Manuals