Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws, rear wheel housing liner | Tightening torque | 2.8 nm (2 ftlb.) | +/-0.3 nm (+/-0.2 ftlb.) | ||
|
Wheel housing liner/inner mounting |
|||||
| Fastening nuts, rear wheel housing liner | Tightening torque | 2.8 nm (2 ftlb.) | +/-0.3 nm (+/-0.2 ftlb.) | ||
|
Wheel housing liner/inner mounting |
|||||