Installing FLOORPAN

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

1. Apply adhesive. → Application depth: 3.0 mm 

   Working with body structural adhesive. → 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

   Fig 1: Applying Adhesive

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   Fig 2: Applying Adhesive

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Rivet in floorpan.
   1. 2.1. In area -A;B-  → BLIND RIVET 999.190.227.01 must be used.
   2. 2.2. In area -C-  → BLIND RIVET 999.190.230.01 must be used.
      Fig 3: Installing Floorpan

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Rivet in floorpan.
   1. 3.1. In area -A-  → BLIND RIVET 999.190.230.01 must be used.
   2. 3.2. In area -B;C;D-  → BLIND RIVET 999.190.227.01 must be used.
      Fig 4: Installing Floorpan

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.