Removing Switching Element For Filler Flap

Fig 1: Identifying Filler Flap Switch Element

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Switch off ignition.
2. Loosen control unit for electronic parking brake.
   1. 2.1. Unscrew fastening screws -3-  .
   2. 2.2. Lay the control unit aside (do not disconnect plug connection).
   Fig 2: Loosening Control Unit For Electronic Parking Brake
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Loosen fastening screws -2-  for switching element for filler flap -1-  by approx. three turns.
4. Pull switching element -1-  to the rear and remove it from the bracket.
   Fig 3: Removing Switching Element For Filler Flap

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Release the plug connection -a-  and pull it off -A-  .
   Fig 4: Disconnecting Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.