| Tie rod to axial joint |
M14 x 1.5 thread |
Tightening torque |
70 Nm (52 ftlb.) |
|
|
| Lower wishbone to supporting frame, front (caster eccentric) |
M12 x 1.5 thread (screw and nut can be re-used!) |
Tightening torque |
50 Nm (37 ftlb.) |
+120° |
|
| Lower wishbone to supporting frame, rear (camber eccentric) |
M12 x 1.5 thread (screw and nut can be re-used!) |
Tightening torque |
50 Nm (37 ftlb.) |
+120° |
|
| Lower wishbone to rear chassis subframe (camber eccentric adjuster) |
M12 x 1.5 thread |
Tightening torque |
100 Nm (74 ftlb.) |
|
|
| Tie rod to chassis subframe (toe eccentric adjuster) |
M12 x 1.5 thread |
Tightening torque |
100 Nm (74 ftlb.) |
|
|