| 1 - Support for front axle to subframe |
M10 x 30 thread |
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| 2 - Steering gear to subframe |
M12 x 1.5 thread |
Tightening torque |
90 Nm (67 ftlb.) |
+150° |
|
| 3 - Support for front axle to front crash support |
M10 x 35 thread |
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| 4 Front - Support for front axle and crash support to body |
M12 x 1.5 x 130 thread |
Tightening torque |
90 Nm (67 ftlb.) |
+180° |
|
| 4 Rear - Vibration strut (transverse strut) with support for front axle to body |
M12 x 1.5 x 58 thread |
Tightening torque |
90 Nm (67 ftlb.) |
+90° |
|
| 5 - Support for front axle to rear crash support |
M10 x 35 thread |
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| Vibration strut (transverse strut) to door sill |
M12 x 1.5 x 35 thread |
Tightening torque |
85 Nm (63 ftlb.) |
|
|
| Support for front of front axle to subframe |
M8 x 20 thread |
Tightening torque |
33 Nm (24 ftlb.) |
|
|
| Electric passenger compartment heater to support for front of front axle |
Hybrid only - M6 x 16 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| High voltage distributor to support for front of front axle |
Hybrid only - M6 x 25 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|