WM 4X00IN Tightening Torques For Front Axle (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.): Subframe

Location	Description	Type	Basic value	Tolerance 1
Subframe to front body	M12 x 1.5 x 75 thread	Tightening torque	90 Nm (67 ftlb.)	+90°
Subframe to rear body	M12 x 1.5 x 75 thread	Tightening torque	90 Nm (67 ftlb.)	+90°
Engine mount to subframe	M10 x 80 thread	Tightening torque	65 Nm (48 ftlb.)
Crash support to subframe	M10 x 55 thread	Tightening torque	50 Nm (67 ftlb.)	+90°
Bulkhead plate (heat shield) to subframe	M5 x 12 thread	Tightening torque	5 Nm (3.5 ftlb.)
Heat shield to crash support, anti-roll bar mount	M5 x 12 thread	Tightening torque	5 Nm (3.5 ftlb.)
Reinforcement plate to subframe	M8 x 20 thread	Tightening torque	33 Nm (24 ftlb.)