Drive Shaft And Unit Mounts
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Drive shaft to wheel hub (setting 1) | Setting 1: Before installing the wheel carrier, M22 x 1.5 thread | Tightening torque | 130 Nm (96 ftlb.) | ||
| Drive shaft to wheel hub (setting 2) | Setting 2: With wheel carrier installed, M22 x 1.5 thread | Tightening torque | 460 Nm (340 ftlb.) | ||
| Drive shaft to differential | M8 x 53 thread | Tightening torque | 22 Nm (16 ftlb.) | +90° |