| Brake calliper to wheel carrier |
M14 x 1.5 thread (always replace screws and lock nuts after removal.) |
Tightening torque |
140 Nm (104 ftlb.) |
|
|
| Brake hose bracket to wheel carrier |
M6 x 16 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Brake hose bracket to body |
M6 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Brake hose to brake calliper |
M10 x 1 thread |
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|
| Brake cover panel to wheel carrier |
M6 x 16 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Brake disc to wheel hub |
M6 x 12 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Brake calliper to wheel carrier |
M12 x 1.5/always use new screws following removal |
Tightening torque |
85 Nm (63 ftlb.) |
|
|
| Brake hose bracket to brake calliper |
M6 x 16 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Brake hose to brake line |
M10 x 1 thread |
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|
| Brake line to brake calliper |
M10 x 1 thread |
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|
| Brake cover panel to wheel carrier |
M6 x 16 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Brake disc to wheel hub |
M6 x 12 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| EPB actuator to wheel carrier |
M8 x 38 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
+60° |
|
| ABS cable holder to rear axle wheel carrier |
M6 x 16 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Pedals to cowl panel |
M8 x 25 thread |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Brake booster to pedals |
M8 x 190 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Accelerator pedal box to body |
M6 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Screws for articulated strut to pedal bearing block |
|
Tightening torque |
10 Nm (7.5 ftlb.) |
+/-1.5 Nm (+/- 1.0 ftlb.) |
|
| Clip (holder) for brake light switch |
|
Tightening torque |
8 Nm (6 ftlb.) |
+/-1 Nm (+/- 0.5 ftlb.) |
|