LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Panamera Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> 44 - Wheels, Tires, Suspension Alignment -- PANAMERA (970) >> WM 440593 Balancing/Optimizing Wheels (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Balancing/Optimizing Wheels >> Balancing/optimizing wheels

Balancing/optimizing wheels

In certain cases, it may be necessary to measure radial force variations. This should be done before normal balancing is performed.

The entire process is subdivided into several operations:

  1. Fitting the tire on the rim.
  2. A - Measuring radial force variations and optimizing the wheels if necessary. Then balancing the wheels.

    B - As an alternative to item 2 A, if there is no device available to measure radial force variations: Stationary balancing of the wheel (eliminating static and dynamic imbalance) with optimization of rolling smoothness.

  3. Fitting the wheel on the vehicle.
scientia non olet · About LEMON Manuals