Component Overview
WARNING: This page is about a different variant/trim than selected.
Crankshaft
| 1 | Crankshaft |
| 2 | Straight pin, 6x20 |
| 3 | Spring, 5 x 6.5 |
| 4 | Thrust washer (grooves facing out) |
| 5 | Main bearing shell, upper |
| 6 | Main bearing shell, lower |
| 7 | Shaft sealing ring => Do not touch sealing ring lip! Clean crankshaft flange and oil lightly |
| 8 | View of crankshaft flange |
| 9 | Crankshaft bearing classification (four types) G Yellow; B Blue, R Red; N Green => (example: GGGGG-BBBB; 5 main shaft bearings with yellow marking, 4 double (8) connecting rod bearings with blue marking) => For numbering, see A |
| A | Direction of travel (main bearing 1 is the first in direction of travel against output) |