Group 28: Ignition
- Ignition coil
- Spark plugs → Tightening torque: 25 Nm (19 ftlb.)+1.5 Nm (+1 ftlb.) → Tightening torque: 31.5 Nm (23.5 ftlb.)+1.5 Nm (+1 ftlb.)
- Aluminum screw M6 x 45/replace → Initial tightening: 4 Nm (3 ftlb.) → Final tightening: +90°
- For tightening torque for screw(s), see Group 15 Valve cover
- For tightening torque for screw(s), see Group 15 Valve cover
- Transport eyebolt
- Knock sensor
- Screw M8 x 35 → Tightening torque: 23 Nm (17 ftlb.)
- Phase sensor
- Aluminum screw M6 x 16/replace → Initial tightening: 4 Nm (3 ftlb.) → Final tightening: +60°
- Hydraulic valve for variable valve lift control
- Screw, BM5 x 12 → Tightening torque: 6 Nm (4.5 ftlb.)
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Cover on fuse box in the plenum panel | Internal Torx screw, | Tightening torque | 3.5 Nm (2.5 ftlb.) |