LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Panamera Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 42 - Rear Wheel Suspension, Drive Shafts -- PANAMERA (970) >> WM 425219 Removing And Installing Rear Wheel Bearing Housing (Except PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Preliminary Work

Preliminary Work

  1. If the wheel bearing housing is replaced: 

    Remove the relevant hub cap using puller hook 9229/1  and loosen axle nut (lock nut) -1-  before raising the vehicle. Operate the brake while doing this (2 mechanics required).

    Fig 1: Identifying Axle Nut (Front Axle)
    G09807615Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Raise the vehicle → 4X00IN LIFTING THE VEHICLE .
  3. Remove wheel → 440519 REMOVING AND REINSTALLING WHEEL .
  4. Remove rear brake disc → 465319 REMOVING AND REINSTALLING REAR BRAKE DISC → 465419 REMOVING AND REINSTALLING REAR BRAKE DISC (PCCB) .
scientia non olet · About LEMON Manuals