Subsequent Work

Information 

New brake pads require a slightly longer bedding-in period for PCCB brake discs than grey cast iron brake discs.

In general, the following applies: New brake pads must be worn in (bedding-in period). Their optimum braking effect is therefore not reached until after a few hundred kilometers. The slightly reduced braking effect must be compensated for by increased pressure on the brake pedal. The same also applies after a brake disc change.

1. Position disc brake pads by operating the brake several times.
2. Check the brake fluid level and correct it if necessary.

3. Fit wheel. Use assembly aids (assembly pins) -1-  . → 440519 REMOVING AND INSTALLING WHEEL .
   Fig 1: Identifying Assembly Aids (Threaded Bolts For Fitting Wheel)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.