Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Applying adhesive | Application depth | 3.0 mm | |||
| Applying adhesive | Application depth | 3.0 mm | |||
| Dimension A | Distance | 25 mm | |||
| Dimension B | Distance | 80 mm | |||
| Dimension C | Slot | Width | 10 mm | ||
| Dimension D | Slot | Length | 45 mm | ||
| Dimension E | Distance | 60 mm | |||
| Dimension F | Slot | Width | 10 mm | ||
| Dimension G | Slot | Length | 25 mm | ||
| Dimension H | Distance | 60 mm | |||
| Dimension I | Distance | 25 mm | |||
| Dimension J | Slot | Width | 10 mm | ||
| Dimension K | Slot | Length | 45 mm | ||
| Applying adhesive on A-pillar | Application depth | 3.0 mm |