LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Panamera Base >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 72 - Seat Frames -- PANAMERA (970) >> WM 726719 Removing And Installing Mount For Rear Backrest (Except PANAMERA Executive, PANAMERA 4 Executive) >> Installing Mount For Rear Backrest >> Installing Rear Backrest Mount

Installing Rear Backrest Mount

  1. Position inner and outer bearing pins with the bearing sleeves.
  2. Use a suitable tool to secure the fastening nuts -3-  to prevent them from turning as well.
  3. Screw in bearing pins -1 and 2-  and tighten to the specified tightening torque. Tightening torque 50 Nm (37 ftlb.) +/-5 Nm (+/-3.5 ftlb.) 
    Fig 1: Tightening Bearing Pins
    G09812696Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals