Removing Light Bulb Igniter

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche. 
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
• Never touch the electric pins and plug contacts. 

1. Unscrew fastening screws -1-  .
2. Carefully remove light bulb igniter -2-  from the headlight.
   Fig 1: Removing Light Bulb Igniter From Headlight

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.