LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayman Base, Standard >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> 28 - Ignition System -- 987-BOXSTER-CAYMAN >> WM 282020 Removing And Installing Ignition Coils (All Models) >> Installing Ignition Coils

Installing Ignition Coils

  1. Insert ignition coil into spark plug recess.
  2. Fit and tighten internal Torx screw (E10, M6 x 16).

    → Tightening torque: 10 Nm (7.5 ftlb.) 

  3. Connect cable plug for ignition coil.
  1. 3.1. Make sure that it latches into place correctly and is seated securely.
scientia non olet · About LEMON Manuals